After pre-location setup, this is how looks like the transmission installed.
Testing the transmission shifter, sorry for somebody, wilson is speaking spanish. but the easy translation is first, second, third.... and the last is reverse.
:P
A simple view How make a 2jz swap into an rx7. Too many years ago, i worked with my FC3S, using a haltech e6k for tunning fuel and timming. Tired of the exhaust , and excess of fuel, and after broken an rotary 13b junker engine. I bought a 2JZ for my car.
Monday, April 11, 2016
FD 2JZ - Transmission installation. [DONE]
This is the custom transmission mount.
After pre-location setup, this is how looks like the transmission installed.
After pre-location setup, this is how looks like the transmission installed.
Saturday, April 9, 2016
2jz FD Swap
Recently i receive pictures taken from a friend of mine.
He was working for a client, making a 2jz swap into one FD3S RX7
Here some pictures:
Sub frame. See how was cut and solder again to avoid the use of splitters.
So, in that way the engine is in a low center of gravity.
Steering rack was positioned some centimeters lower.
This is the RX7 with the engine mounted
He was working for a client, making a 2jz swap into one FD3S RX7
Here some pictures:
Sub frame. See how was cut and solder again to avoid the use of splitters.
So, in that way the engine is in a low center of gravity.
Steering rack was positioned some centimeters lower.
This is the RX7 with the engine mounted
Thursday, March 13, 2014
Dyno Test
One word: Happy.
Not happy like Pharrell Williams, more happy like him. AHAHHAAHAH.
Well in the path to happiness, sorry again ahahahah.
Ok ok ok ok, i got it.
Dyno. Some days ago , i was in my job, in the way to my house, i make an stop in mecafast dynamometer.
What happend, easy. The Rx7 made 376 WHP with 14psi.
Thanks Lord for my 2JZ.
Later i'll put and apexi, and some stuff to increase my horsepower with less 20 psi.
Now watch the video. Enjoy!
Not happy like Pharrell Williams, more happy like him. AHAHHAAHAH.
Well in the path to happiness, sorry again ahahahah.
Ok ok ok ok, i got it.
Dyno. Some days ago , i was in my job, in the way to my house, i make an stop in mecafast dynamometer.
What happend, easy. The Rx7 made 376 WHP with 14psi.
Thanks Lord for my 2JZ.
Later i'll put and apexi, and some stuff to increase my horsepower with less 20 psi.
Now watch the video. Enjoy!
Thursday, February 20, 2014
Single Turbo Conversion
After too many weeks trying to be ready. We confront one problem... Twins Turbo Broken. So I tried to replace it using one pair of twin, from another 2jz aristo and.....
 |
| lot of smoke because was burning oil... and leak water..... |
I see light in the end of tunnel.
Big Turbo Conversion.
 |
| Before install , we check everything... |
 |
| GT45 EBAY TURBO. Lag? nahhh spool is faster. |
 |
| Seems big, but 3.0 2jz move it quickly, |
 |
| Soldering exhaust VBAND 4" |
 |
| Everything ok... :) |
 |
| Exhaust Manifold. Powered By http://www.skperformancestore.com/portal/ |
 |
| Ok fit in engine bay lol :P |
 |
| Sexy as hell! |
 |
| Ok resume: 4" pipe for down pipe... Later you will understand. |
 |
| This guy is Manuel. That guy is a master in Argon soldering. |
And.... WALA!!
 |
| Priceless |
 |
| Quick View |
 |
| Before. Stock Aristo Twin Turbo |
 |
| After GT45 SINGLE TURBO |
TEST 1 incomplete... A lot of thing to be finish. Running with 9/10 pound of boost.
Sunday, December 15, 2013
Front Mount Intercooler installed.
After some weeks of innactivity.. i'm back. Now installing my front mount intercooler.
I bought the piping 3" kit for this process. I'm very happy because i retain my fog lights in place.
I bought the piping 3" kit for this process. I'm very happy because i retain my fog lights in place.
Monday, September 16, 2013
Front Turbo Oil Leak
Tipical View of oil leak.
Old turbo
For resolv this, was simple, put another turbo.
Sunday, September 15, 2013
Hydrofan
In the middle of the process, some things happends.
-Hydrofan: This problem is basically shortest because the water pump in some models have the oil pump for the fan cooler.
So what , some people do, is take the oil line and make a loop.
-Hydrofan: This problem is basically shortest because the water pump in some models have the oil pump for the fan cooler.
So what , some people do, is take the oil line and make a loop.
 |
| Water Pump, and Hydrofan Lines. |
Friday, September 13, 2013
Here we go!
 |
| The animal! |
 |
| This picture make me happy! |
 |
| Shifter in the middle |
 |
| My bro, him is more happy than me. |
Starting Swap
The first thing i have to do. Was put splitters between the subframe and chassis.
Because the 2jz is more taller than rotary engine.
Because the 2jz is more taller than rotary engine.
 |
| Aluminium Splitters 1 1/2 inch high |
 |
| Me cutting screws |
 |
| Subframe dismount |
 |
| Finally, engine mounts was done. I use landcruiser engine mounts for this swap. |
 |
| Old shaft |
 |
| Transmission mount |
 |
| This is Nomar AKA "Bambam" ahahahha |
Subscribe to:
Posts (Atom)